Tradfri 30w Power supply with StyrBAR

[kkorkky]

My setup is as follows. 2 x TradFRI power supplies rated 30 Watt. Each one connects to 4 x 80cm Led lights. I want to control them via  Two (2) StyrBAR remote controls.  I can connect one StyrBar to both TreadFri  and that works as i expected ( Dimming and off/On functionality for BOTH simultaneously) when I go through the pairing of the second  StyrBar (hold close and press pair for 10 secs) it overwrites the previously paired controller. Is there a way to control both TradFRI power supplies with two SytrBAR controllers.  Just like a stair light where on /off at bottom of stairs and the same at the top of the stairs. 

I have looked at the product documentation provided and I cant see if or how it can be performed.

[Heiko · Accepted solution]

Hi  @kkorkky ,

you need a hub in order to achieve this... either the old TRADFRI Gateway, or the new DIRIGERA hub.

If you have a hub (and the according app on your smart phone), you can group your 2 devices and add additional controllers.

Hope, this helps!

regards, Heiko

[kkorkky]

This solution worked for me. I was even able to bring my older under cab lights into management. Both sets of lights now have two remote controllers.  I now have three intelligent hubs, shame the Ikea Hub is

Zigbee and not "Things"

[Heiko]

glad to help, thank you for the feedback!

regards, Heiko